ON-BOARD COMPUTER: trip settings

  • 1
  • 2
  • 3
  • 4
  • 5

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections

Interpreting the display selected

101 778 km

a) Total mileage and trip mileage recorder.

112,4 km

Fuel used

b) Journey parameters:

Fuel consumed since the last reset.

8 l

Current

Current fuel consumption.

This value is displayed after a speed of approximately 20 mph (30 km/h) is reached.

7,4 l/100

Examples of selections

Interpreting the display selected

Range

Estimated range with remaining fuel.

The value is displayed after driving 400 metres.

541 km

Distance

Distance travelled since last reset.

522 km

Average

Average speed since the last reset.

The value is displayed after driving 400 metres.

123,4 km/h

Examples of selections

Interpreting the display selected

On-board computer with mileage-before-service message

c) Mileage before service or oil change.

Mileage before service

With the ignition switched on, the engine not running and the display set to “Service Intervals”, press and hold the OK button for approximately 5 seconds to display the mileage before service (distance or time to the next service). When the distance value approaches its limit, there are several possible scenarios:

- range less than 930 miles (1,500 km) or one month: the message “Service due in” is displayed accompanied by the nearest term (distance or time);

- range equal to 0 km/miles or service date reached: the message “Service required” is displayed accompanied by warning light ©.

The vehicle requires a service as soon as possible.

Service Intervals

Service in

30 000 km / 12 mo

Service due in

300 km / 24 days

Service required

Reset: to reset the distance before the next service, press and hold button 2 for approximately 10 seconds until the display shows the mileage before service permanently.

NB: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.

Examples of selections

Interpreting the display selected

On-board computer with distance before next service message (cntd.)

c) Mileage before service or oil change.

Mileage before service

With the ignition switched on, the engine not running and the display set to “Mileage before service”, press and hold the OK button for approximately 5 seconds to display the mileage before the next service, then press the 2 button to view the mileage before the next oil change (distance or time remaining before the next service). When the distance value approaches its limit, there are several possible scenarios:

- distance/time remaining less than 900 miles (1,500 km) or one month: the message “Service due in” is displayed, accompanied by the nearest term (distance or time);

- range equal to 0 km/miles or service date reached: the message “Service required” is displayed accompanied by warning light ©.

The vehicle requires an oil change as soon as possible.

Service Intervals

Oil change in

30 000 km / 24 mo

Service due in

300 km / 24 days

Service required

Depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low speed, door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the next oil change can therefore decrease more quickly in some cases than the actual distance travelled.

Resetting: to reset the mileage before a service, press and hold button 2 for approximately 10 seconds until the display shows the range permanently.

NB: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.

Examples of selections

Interpreting the display selected

d) Reset the tyre pressure.

Refer to the information on the “Tyre pressure monitoring system” in Section 2.

+

Tyre pressure

No message memorised

e) Trip log.

Successive display:

- information messages (passenger airbag OFF etc.);

- operating fault messages (Check injection system, etc.).

f) Estimated range with remaining reagent.

Refer to the information on “Reagent tank” in Section 1.

Top Up AdBlue before 2400 km