FRONT SEATS WITH MANUAL CONTROL
To move the seat forwards or backwards
Lift handle 1 to unlock. Release the handle once the seat is in the correct position and ensure that the seat is locked.
To raise or lower the seat base
Move lever 2 as many times as necessary upwards or downwards.
To tilt the seatback
Lift the lever 3 and move the seatback to the desired position.
With the ignition on:
- pressing the switch 4 on the required seat for the first time activates the heating system at maximum power.
Both integrated switch warning lights come on;
- a second press decreases the heating to minimum power. One integrated warning light comes on;
- pressing for the third time turns the heating off.
When an operating fault is detected, the integrated warning lights on the switch 4 for the seat concerned flash.
Consult an approved dealer.
For safety reasons, carry out any adjustments when the vehicle is not being driven.
We would advise you not to recline the seatbacks too far to ensure that the effectiveness of the seat belts is not reduced.
Nothing should be placed on the floor (area in front of driver) as such objects may slide under the pedal during braking manoeuvres, thus obstructing its use.