To raise the headrest
Pull the headrest upwards to the desired height.
To lower the headrest
Press button 2 and guide the headrest down to the desired height.
To adjust the angle of the headrest
Depending on the vehicle, move section A towards or away from you to the required position.
To adjust side supports B
Depending on the vehicle, sections B can be adjusted independently to the desired position.
To remove the headrest
Raise it to its highest position (tilt the seatback backwards if necessary). Press button 2 and lift the headrest to release it.
To refit the headrest
Check that the headrest rods are clean 3.
Insert the headrest rods into the holes 1 (tilt the seatback backwards if necessary).
Lower the headrest until it locks, press button 2 and lower the headrest as far as it will go.
Check that the headrest is properly locked in place.
The headrest is an important safety component: ensure that it is in place and in the correct position. The distance between your head and the headrest and the distance between the head and section A should be as small as possible.