Position for use
Lift the headrest fully until it locks.
To remove the headrest
Lower the seatback slightly, press the tab 1 and remove the headrest.
To refit the headrest
Insert the headrest rods into the sleeves, and lower the headrest until it locks.
To adjust the angle of the headrest
Depending on the vehicle, move section A towards or away from you to the required position.
To adjust side supports
Depending on the vehicle, sections B can be adjusted independently to the desired position.
Storage position 2 for the headrest
Press tab 1 and lower the headrest completely.
When the headrest is set at the lowest position, this is for storage only. It should not be in this position when a seat is occupied.
The headrest is a safety component; check that it is fitted and in the correct position. The top of the headrest should be as close as possible to the top of the head.