Back to the list

VEHICLE SETTINGS CUSTOMISATION MENU

  • 1
  • 2
  • 3
  • 4
  • 5

Depending on the vehicle equipment, this function allows you to activate/deactivate and adjust some of the vehicle’s functions.

Vehicles fitted with a navigation system

Accessing the settings menu

With the vehicle at a standstill, using the multimedia screen 1, select “Vehicle”, “User settings” to access the various settings.

Adjusting the settings

Select the function to modify:

a) Free wheel in ECO mode

(please refer to the information on “Driving advice, ECO-driving” in Section 2;

b) Auto door lock while driving;

c) Use handsfree card: open/close;

d) Indicator sound volume;

e) Internal welcome sound;

f) External welcome;

g) Automatic Cabin Light;

h) Rear wiper when rear gear engaged;

i) Driving style indicator.

Depending on the function, select “ON" or "OFF" to activate or disable it and "+" or "-" to adjust the volume of the indicators.

For safety reasons, carry out any adjustments when the vehicle is stationary.

Vehicles not fitted with a navigation system

Accessing the settings menu on display 2

With the vehicle at a standstill, press and hold the switch 3 OK to access the settings menu.

Adjusting the settings

Browse using the control 4 to select the function to adjust:

a) Free wheel in ECO mode

(please refer to the information on “Driving advice, ECO-driving” in Section 2;

b) Auto door lock while driving;

c) Unlock driver door only;

d) Rear wiper when rear gear engaged;

e) Front park assist;

f) Automaticmain beam lights;

g) Lane departure warning : VOLUME;

h) Lane departure warning : Sensitivity;

i) Rear park assist;

j) PARKING ASSIST VOLUME;

k) LANGUAGE;

l) Units;

m) Style;

n) COLOUR.

= function activated

< function deactivated

Once a line has been selected, press the switch 3 OK to adjust the function.

If you select either “PARKING ASSIST VOLUME” or “LANGUAGE”, you will have to make a further selection (sound volume of the parking distance control or instrument panel language). In this case, make your selection and confirm it by holding the switch 3 OK - the selected value is shown by a ~ in front of the line.

To exit the menu, press the control 4 upwards or downwards. It may be necessary to carry out this operation several times.

For further explanations of the Free wheel function in ECO mode, refer to the information on “Driving Advice, ECO-driving” in section 2.

The vehicle settings personalisation menu cannot be used when driving. At speed exceeding 12 mph (20 km/h), the instrumental panel display switches automatically back to trip computer and warning system mode.