Unlocking the bonnet catch
Unclip each cover 1 by holding side 2.
Depending on the vehicle, insert the vehicle key in the lock 4 and turn.
Pull the tabs 3 as far as they will go to unlock the bonnet.
Please note when working close to the engine that it may be hot. The engine cooling fan may also start at any moment. The warning light in the engine compartment reminds you of this.
Risk of injury.
Opening the bonnet
- Pull the bonnet forwards (movement A) as far as it will go;
- lift it by pulling it forwards (movement B).
For your safety, do not remove the bonnet holding straps.
Risk of the bonnet falling on the road surface.
Closing the bonnet
Slide the bonnet back until it closes (movement C).
Ensure that the bonnet is properly locked.
Check that nothing is preventing the catch from locking (gravel, cloth, etc.).
Locking the bonnet
- Push the tabs 3;
- depending on the vehicle, insert the vehicle key in the lock 4 and turn;
- replace the covers 1;
- clip them into their housing.
In the event of even a slight impact involving the radiator grille or bonnet, have the bonnet lock checked by an approved dealer as soon as possible.