To move the seat forwards or back
Lift handle 1 to unlock. Release the handle once the seat is in the correct position and ensure that the seat is fully locked into position.
To adjust the lumbar support on the driver’s seat
(depending on vehicle)
Lower handle 2 to increase the support and lift it to decrease it.
To tilt the seatback
Turn control knob 3 to the required position.
Turn control 4 to either position 1, 2 or 3 (depending on the temperature required). The ñ indicator light on the instrument panel comes on once the front seat heating system is operating.
The system, which has a thermostat, regulates the heating level.
To switch off the heated seat function, turn control 4 to the OFF position.
For safety reasons, carry out any adjustments when the vehicle is not being driven.
We would advise you not to recline the seatbacks too far to ensure that the effectiveness of the seat belts is not reduced.
No object should be placed on the floor (in front of the driver). Nothing should be placed around the driver’s feet as such objects may slide under the pedals during sudden braking manoeuvres and obstruct their use.