Back to the list


  • 1
  • 2
  • 3
  • 4
  • 5

Position for use

Raise or lower the headrest while pulling it towards the front of the vehicle.

To remove the headrest

Press the button A on the switch 1 and remove the headrest.

To refit the headrest

Insert the headrest rods into the holes, and lower the headrest to the first notch. Check that it is correctly locked.

Storage position

Press the button A and lower the headrest completely.

When the headrest is set at the lowest position (position B), this is for storage only: it should not be in this position when a seat is occupied.

The headrest is a safety component; check that it is fitted and in the correct position. The top of the headrest should be as close as possible to the top of the head.