DRIVING POSITION: settings

  • 1
  • 2
  • 3
  • 4
  • 5

Manually controlled seats

moving the seat forwards or backwards

Lift handle 1. At the desired position, let go of the handle again. Ensure it is correctly locked in place.

raising or lowering the seat

Move the lever 4 as many times as required.

tilting the seatback

Lift handle 3 and tilt the seatback to the desired position.

ELECTRIC lumbar support adjustment

Move the switch 5 forwards, backwards, up or down.

MANUAL lumbar support adjustment

Raise or lower the handle 2 on the right-hand side of the seat.

Massage

Use switch 6 to access the “Massage” menu from the multimedia screen 8. Please refer to the instructions for the multimedia system.

Front seat heating

With the ignition on, successive presses on the switch 7 of the required seat activate a high or moderate level of heating or switch the function off.

Seat belt

Adjusting the height

Press the button 9 and simultaneously adjust the seat belt to the required height.

Carry out these adjustments when the vehicle is stationary.

Headrest

Raising the headrest

Pull the headrest upwards to the desired height.

Lowering the headrest

Press button 11 and guide the headrest down to the desired height.

ADJUSTING THE ANGLE OF THE HEADREST

If fitted to the vehicle, move the section towards or away from you 10 to the required position.

Folding door mirrors

With the switch 14 in the central position: the door mirrors fold in automatically when the vehicle is locked. They will fold out when the ignition is next switched on.

Depending on the vehicle, to force the door mirrors to fold back or out, position switch 14 at A or B. Automatic mode is then deactivated.

To reactivate it, set switch 14 to the central position.

Door mirrors

Adjustment

Select the door mirror using switch 13, then use button 12 to adjust it to the desired position.