DRIVING POSITION: settings
Manually controlled seats
moving the seat forwards or backwards
Lift handle 1. At the desired position, let go of the handle again. Ensure it is correctly locked in place.
raising or lowering the seat
Move the lever 2 as many times as required.
tilting the seatback
Lift handle 3 and tilt the seatback to the desired position.
Electrically controlled seats
Pulling forward/backward and raising/lowering the seat
Use the switch 4.
tilting the seatback
Move the top of switch 5 forwards or backwards.
Carry out these adjustments when the vehicle is stationary.
Adjusting lumbar support
Raise or lower lever 6.
Front seat heating
Providing the ignition is on, pressing the switch 7 on the desired seat will activate the system. The switch warning lights come on. The system regulates the heating and deactivates it if necessary. Pressing the button again lowers the temperature. Pressing a third time switches the heating off.
Seat belt
Adjusting the height
Press the button 8 and simultaneously adjust the seat belt to the required height.
Headrest
Raising the headrest
Pull the headrest upwards to the desired height.
Lowering the headrest
Press the button 9 and guide the headrest down to the desired height.
Door mirrors
Select the door mirror using the switch 11, then use the button 12 to adjust it to the desired position. Press the switch 10 to fold in the door mirrors.
Locking/unlocking the vehicle
Press the switch 15 on the driver’s or front passenger’s door:
… to lock;
‡ to unlock.
Electric windows
Operate the switches as follows:
13 for the driver’s side;
16 for the front passenger side;
17 and 18 for the rear passengers.
Passenger safety
The driver can prevent the front and rear passenger electric windows from operating (and the driver’s window) by pressing switch 14.
