Back to the list

Exterior lighting: replacing bulbs

  • 1
  • 2
  • 3
  • 4
  • 5

Exterior lighting: replacing bulbs

Tip
To replace LED bulbs, consult an approved dealer.
Before replacing the bulb.
Identify its initial positioning in its housing.
When changing the bulb.
WARNING
The bulbs are under pressure and may break when replaced.
Risk of injury.
After changing the bulb.
To refit, proceed in the reverse order, taking care not to damage the wiring.
Make sure:
  • that the replaced bulb is put back in place in its housing in the same manner;
  • that it is correctly locked;
  • that the cover is clipped (if present).

Front headlights

Changing bulbs

Daytime running lights/side lights 1
Consult an approved dealer.
LED main beam headlights/dipped beam headlights/direction indicator lights 2
Consult an approved dealer.

Rear and indicator lights

LED side light/brake light 1

Consult an approved dealer.

Direction indicator lights 2

  • Open the luggage compartment door;
  • loosen the nut 3 located behind the trim;
  • release the lights unit 4 from outside the vehicle by pulling towards the rear;
  • remove the bulb holder by unscrewing it by a quarter of a turn, then replace the bulb.
Bulb type:WY16W.
Tip
To comply with current legislation, or as a precaution, you can obtain an emergency kit from your approved dealer containing a set of spare bulbs and fuses.
WARNING
The bulbs are under pressure and may break when replaced.
Risk of injury.

LED reversing lights and fog lights 5

Consult an approved dealer.

LED high-level brake light 6

Consult an approved dealer.

LED number plate lights 7

(depending on the vehicle)
Consult an approved dealer.

Number plate lights 8

(depending on the vehicle)
  • Unclip the light by pressing the tab 9
  • remove the light cover to gain access to the bulb.
Bulb type:W5W.
WARNING
The bulbs are under pressure and may break when replaced.
Risk of injury.

LED side repeaters 10

Consult an approved dealer.