Back to the list

WINDSCREEN WIPER BLADES

  • 1
  • 2
  • 3
  • 4
  • 5

Replacing windscreen wiper blades 1

With the ignition on and the engine stopped:

- for vehicles equipped with the automatic windscreen wiper function, lower the windscreen wiper stalk fully: they stop slightly away from the bonnet;

- lift the wiper arm 2;

- press the button firmly 3 then remove the blade 1.

To refit

To refit the wiper blade 1, insert it in its housing in the arm 2, then clip it until you hear a click. Make sure that the blade is correctly locked in position.

On vehicles equipped with the automatic windscreen wiper function, raise the windscreen wiper stalk: the windscreen wiper blades will settle down in the bonnet.

Check the condition of the wiper blades. You are responsible for their service life:

- clean the blades, windscreen and rear screen regularly with soapy water;

- do not use them when the windscreen or rear screen are dry;

- free them from the windscreen or rear screen when they have not been used for a long time.

- In frosty weather, make sure that the wiper blades are not stuck by ice (to avoid the risk of the motor overheating).

- Check the condition of the wiper blades.

They should be replaced as soon as they become less efficient: approximately once a year.

When changing the blade, when it has been removed, do not let the wiper arm fall against the window: risk of breaking the window.

Rear screen wiper blade 5

- With the ignition off, lift wiper arm 6;

- release the blade 5 by pulling it.

To refit

To refit the wiper blade, proceed in reverse order to removal. Make sure that the blade is correctly locked in position.

Before changing the rear wiper blade, make sure the stalk is in the stop position (deactivated).

Risk of injury.