REAR SCREEN WASH, WIPE
Y Speed-dependent timed rear screen wiper
With the ignition on, turn the end of stalk 1 to align mark 2 with the symbol.
Wiping frequency varies with speed.
p Rear screen wash/wipe
With the ignition on, turn the end of stalk 1 to align mark 2 with the symbol.
When the stalk is released, it returns to the rear wipe position.
Special note
If the windscreen wipers are operating or are in automatic mode, the rear screen wiper wipes intermittently when reverse gear is engaged.
When working in the engine compartment, ensure that the windscreen wiper stalk is in the park position.
Risk of injury.
Before any action on the rear screen (washing the vehicle, de-icing, cleaning the windscreen, etc.) return stalk 1 to the park position.
Risk of injury or damage.
Check the condition of the wiper blades. You are responsible for their service life:
- they must remain clean: clean the blades and the rear screen regularly with soapy water;
- do not use them when the rear screen is dry;
- free them from the rear screen when they have not been used for a long time.
In all cases, replace them as soon as they begin to lose efficiency: approximately once a year.
Before using the rear wiper, check that no object obstructs the travel of the blade.
Do not use the wiper arm to open or close the tailgate.