CLOCK AND EXTERIOR TEMPERATURE
Vehicles fitted with a multimedia screen
The time and exterior temperature are displayed on the multimedia screen 1.
Refer to the multimedia instructions.
Vehicles not fitted with a multimedia screen
Press the switch 2 as many times as required to reach the “Vehicle” tab.
Repeatedly press control 3 or 4 to set the 6 clock.
Press and hold switch 5 “OK” until the time display flashes.
Set the hour using the 3 or 4 control, then wait for three seconds: the minutes will flash.
Set the minutes using the 3 or 4 control, then wait for three seconds: the flashing stops and the time setting is complete.
External temperature indicator
Special note:
When the external temperature is between -3°C and +3°C, the °C symbols flash (indicates risk of ice).
Depending on the vehicle, If the electrical supply is cut (battery disconnected, broken supply wire, etc.), the clock will automatically go back to the right time after a few minutes once the system is capable of receiving information GPS.
External temperature indicator
As ice formation is related to climatic exposure, local air humidity and temperature, the external temperature alone is not sufficient to detect ice.
PERSONALISING THE VEHICLE SETTINGS
