BACK AND SIDE LIGHTS: changing bulbs
Direction indicator lights, brake and side lights
Undo bolt 1 to remove the light.
Release the light assembly from outside the vehicle by pulling towards the rear.
Remove the bulb holder 3 by releasing clips 2.
Refitting
To refit, proceed in the reverse order, taking care not to damage the wiring, and fasten clips 2 on the bulb holder 3.
4 Brake light
Bulb type 4 : P21W.
5 Indicator light
Bulb type 5: PY21W.
6 Reversing light
Bulb type 6: P21W.
7 Fog light
Bulb type 6: P21W.
LED 8 side lights
Consult an approved dealer.
High-level brake light
Remove the nut 9 and release the brake light from its housing.
Bulb type 10 : P21W.
Refitting
To refit, proceed in the reverse order, taking care not to damage the wiring.
The bulbs are under pressure and may break when replaced.
Risk of injury.
Number plate light
Undo screw 11.
Remove the light cover 12 to access the bulb.
Bulb type: W5W.
Indicator lights 13
Unclip indicator light 13 (using a flat-blade screwdriver or similar).
Turn bulb holder 14 a quarter of a turn and take out the bulb.
Bulb type: W5W.
The bulbs are under pressure and can break when replaced.
Risk of injury.