HEADLIGHT BEAM ADJUSTMENT
Control A is used to adjust the height of the headlight beams according to the load.
Turn control A anticlockwise to lower the beams and clockwise to raise them.
Examples of positions for adjusting control A according to the load | |
|---|---|
Driver alone or with front passenger | 0 |
Driver with one front passenger and one rear passenger | 1 |
Driver with one front passenger and two rear passengers | 2 |
Driver with one front passenger and two or three rear passengers | 3 |
Driver with one front passenger, three rear passengers and luggage | 3 |
The table below gives some examples. In all cases, adjust control A according to the vehicle load so that the road can be seen and other drivers are not dazzled.
If driving on the left in a left-hand drive vehicle (or vice versa), drivers must have the lights adjusted by an authorised dealer for the duration of the trip.