GEAR LEVER, HANDBRAKE
Handbrake
To release:
Pull lever 2 up slightly, press button 1 and then lower the lever to the floor.
The warning light } on the instrument panel will go out.
The red warning light on the instrument panel will come on if you are driving with an incorrectly released handbrake.
To apply:
Pull lever 2 upwards. Check that the vehicle is immobilised. The warning light } on the instrument panel will come on.
Make sure that the handbrake is fully released when driving (red indicator light off), otherwise overheating, or even damage, may occur.
When stationary and depending on the slope and/or vehicle load, it may be necessary to pull up the handbrake at least two extra notches and move the gear lever to position P.
The vehicle can only be started if the charging cord is unplugged from the vehicle.
In the event an impact to the underside of the vehicle (e.g.: striking a post, raised kerb or other street furniture) this may result in damage to the vehicle (e.g.: twisted axle), the electrical circuit or the traction battery.
Do not touch the circuit elements or any fluids or liquids.
To prevent any risk of accident, have your vehicle checked by an authorised dealer.
Risk of serious injury or electric shock and risk to life.