STARTING, STOPPING THE ENGINE: vehicle with card
The card must be in detection zone 1 or, depending on the vehicle, in detection zone 2.
To start:
- depress the brake pedal;
- press button 3. The “READY” message appears on the instrument panel, accompanied by a beep.
The message disappears when the vehicle speed is above approximately 3.1 mph (5 km/h).
Special features
- If one of the starting conditions is not applied, the message “Press Brake + START” is displayed on the instrument panel;
- in some cases, it will be necessary to move the steering wheel whilst pressing the start button 3 to help unlock the steering column; the message “Turn Steering Wheel + START” will warn you of this;
Depending on the vehicle, you may have a digital key that offers all the functions of the card.
However, if a card has been left inside the vehicle and the doors have been locked with a digital key, all of the card’s functions will be inhibited.
For more information DIGITAL KEY
The vehicle can only be started if the charging cord is unplugged from the vehicle.
“Hands-free” starting with the tailgate open
In this case, the card should not be located in the luggage compartment, to prevent the risk of loss.
Accessories function
(switching on the ignition)
Once you have gained access to your vehicle, you may use some of its functions (radio, navigation, wipers, etc.).
To use the other functions, with the card in the passenger compartment, press the 3 button without pressing the pedals.
Operating faults
In certain cases, the hands-free card may not work:
- the card battery is flat, the secondary 12 V battery is discharged, etc.;
- near to appliances operating on the same frequency as the card (monitor, mobile phone, video game, etc.);
- vehicle located in a high electromagnetic radiation zone.
The message “Place card on zone + START” appears on the instrument panel.
Press the brake pedal, then place the card 5 (button side) on the placement area marked by the 4 symbol. Press the 3 button to start the vehicle. The message goes out.
Conditions for stopping the engine
The vehicle must be at a standstill.
With the card in the vehicle, press the button 3: the engine is stopped, the “READY” message disappears from the instrument panel and the parking brake is applied. The steering column is locked when a door is opened or the vehicle is locked.
If the card is no longer in the passenger compartment or if the card’s battery is flat, when the vehicle is stationary and you try to switch the engine off, the message “Keycard absent : press/hold START” appears on the instrument panel: press button 3 for longer than three seconds. If the card is no longer in the passenger compartment, make sure you can retrieve it before pressing and holding the button. Without the card, you will not be able to restart the vehicle.
With the engine switched off, any accessories being used (radio, etc.) will continue to function for approximately 10 minutes.
When the driver’s door is opened, the accessories stop working.
Never switch off the ignition before the vehicle has stopped completely. Once the engine has stopped, the brake servo, power-assisted steering etc., and the passive safety devices such as the airbags and pretensioners will no longer operate.
When you leave your vehicle, especially if you have your card with you, check that the engine is completely switched off.
Driver’s responsibility when parking or stopping the vehicle
Never leave an animal, child or adult who is not self-sufficient alone in your vehicle, even for a short time.
They may pose a risk to themselves or to others by starting the engine, activating equipment such as the electric windows or locking the doors, for example.
Also, in hot and/or sunny weather, please remember that the temperature inside the passenger compartment increases very quickly.
RISK OF DEATH OR SERIOUS INJURY.