HEADLIGHTS : changing bulbs
Dipped beam/main beam headlights
Open the cover 1.
Disconnect the bulb holder wiring 2.
Unclip spring 3 to remove the bulb holder 2.
Bulb type: H4
It is essential to use 55W anti UV bulbs to prevent damage to the lights' plastic glass.
Do not touch the bulb glass. Hold it by its base.
To refit it, carry out the above operations in reverse order.
Make sure you reposition the wiring in its housing before closing the cover 1.
Front side light
Open the cover 1.
Disconnect the bulb holder wiring 4.
Remove bulb holder 4 from its housing. Replace the bulb.
Bulb type: W5W
To refit it, carry out the above operations in reverse order.
Do not do any work under the bonnet when the vehicle is charging or when the ignition is switched on.
The bulbs are under pressure and can break when replaced.
Risk of injury.
Please note when working close to the engine that it may be hot. The engine cooling fan may also start at any moment. The warning light in the engine compartment reminds you of this.
Risk of injury.
Direction indicator lights
Turn the bulb holder 5 to release it and remove it from its location without disconnecting the wiring. Replace the bulb.
Bulb type: PY21W
To refit it, carry out the above operations in reverse order.
To comply with local legislation, or as a precaution, you can obtain an emergency kit containing a set of spare bulbs and fuses from an approved Dealer.