WINDSCREEN WIPER BLADES
Replacing windscreen wiper blades 2
- With the ignition switched off, lift wiper arm 2 slightly;
- pull tab 1 upwards;
- move the blade in the direction of the arrow.
For refitting, proceed in the reverse order and ensure that the blade is correctly clipped on.
Check the condition of the wiper blades. You are responsible for their service life:
- clean the blades, windscreen and rear screen regularly with soapy water;
- do not use them when the windscreen or rear screen are dry;
- free them from the windscreen or rear screen when they have not been used for a long time.
Before changing the wiper blade, make sure the stalk is in the stop position (deactivated).
Risk of injury.
Replacing the rear screen wiper blade
- With the ignition switched off, lift wiper arm 5;
- pivot the blade 3;
- press tab 4;
- pull the blade to release it (arrow).
For refitting, proceed in the reverse order and ensure that the blade is correctly clipped on.
- In frosty weather, make sure that the wiper blades are not stuck by ice (to avoid the risk of the motor overheating).
- Check the condition of the wiper blades.
Replace the wiper blades as soon as they begin to lose efficiency (approximately once a year).
Whilst changing the blade, take care not to drop the arm onto the window after it has been removed as this may break the window.