REAR AND SIDE LIGHTS: changing bulbs
Side lights and brake lights 1
Consult an approved Dealer.
Direction indicators 2 or 4
(depending on the vehicle)
Consult an approved Dealer.
LED reversing light 3
(depending on the vehicle)
Consult an approved Dealer.
Halogen reversing lights
(depending on the vehicle)
Open the tailgate.
Unclip the trim 5 and remove it.
The bulbs are under pressure and can break when replaced.
Risk of injury.
Turn bulb holder 6 fully anticlockwise and change the bulb.
Refitting
To refit, proceed in the reverse order, taking care not to damage the wiring.
Bulb type: W16W
High level brake light 7
Consult an approved dealer.
Rear fog lights 8
Consult an approved dealer.
Halogen number plate lights 9
(depending on the vehicle)
- Unclip the light 9 (using a tool such as a flat-blade screwdriver).
- remove the light cover to gain access to the bulb.
Bulb type: W5W
LED number plate light 9
(depending on the vehicle)
Consult an approved dealer.
Side indicator lights 10
Consult an authorised dealer.
The bulbs are under pressure and can break when replaced.
Risk of injury.