CLOCK AND EXTERIOR TEMPERATURE

  • 1
  • 2
  • 3
  • 4
  • 5

Display A

To access the clock setting display, press 1 or 2 as many times as necessary until 3 is displayed.

Press and hold button 1 or 2 until the hours flash. You are now in setting mode, press and hold the 1 or 2 button to set the hour.

Wait a few seconds, the minutes flash: repeatedly press the 1 or 2 button to set them.

When setting is complete, wait a few seconds before changing the display.

Display B

Vehicles fitted with a multimedia touch-screen, navigation aid systems, telephones, etc.

Refer to the separate instructions for the function to understand the special features of this equipment.

If the power supply is cut (battery disconnected, supply wire cut, etc.), the clock must be reset.

For safety reasons, carry out any adjustments when the vehicle is not being driven.

External temperature indicator

Special note:

When the exterior temperature is - 3°C to + 3°C, the °C characters flash (signalling a risk of ice on the road).

External temperature indicator

As ice formation is related to climatic exposure, local air humidity and temperature, the external temperature alone is not sufficient to detect ice.