HEADLIGHT BEAM ADJUSTMENT
On vehicles fitted with this function, control A allows you to adjust the height of the beams according to the load.
Turn control A downwards to lower the headlights and upwards to raise them.
Load status | Control position |
Driver only | 0 |
Driver with two passengers and luggage compartment loaded (1) | 2 |
Driver only with the luggage compartment loaded (1) | 3 |
The table below gives some examples. In all cases, adjust control A according to the vehicle load so that the road can be seen and other drivers are not dazzled. |
(1) Load status at maximum permitted weight.
When driving on the left in a left-hand drive vehicle (or vice versa), you must adjust your lights temporarily for the duration of your trip.
Temporary adjustment
Open the bonnet and identify the marking B next to one of the front headlight projectors.
For each headlight, using a screwdriver, turn the screw 1 by a quarter turn towards the - symbol to lower the beams.
Return to the starting point once your trip is over: turn the screw 1 by a quarter turn towards the + symbol to raise the beams.