Back to the list

POWER TAKE-OFF

  • 1
  • 2
  • 3
  • 4
  • 5

Operating the function

With the vehicle stopped, the engine idling, the gearbox in neutral:

- depress the clutch pedal;

- press switch 1. The warning light incorporated in the 1 switch appears;

- release the clutch pedal. The idle speed increases to 1,200 rpm.

Operating faults

If the warning light incorporated in the 1 switch does not appear and the power take-off does not start:

- with the clutch pedal depressed, press switch 1 and release the clutch pedal then repeat the procedure;

- or gradually release the clutch pedal.

Switching off the function

- Depress the clutch pedal;

- press switch 1. The warning light incorporated in the 1 switch goes out after approximately two seconds.

When the power take-off is engaged, do not change gear. If it becomes necessary to change gear, you must first disconnect the power take-off.