BONNET
To open, pull handle 1, located on the left-hand side of the dashboard.
Unlocking the bonnet catch
To unlock, push tab 3 at the same time as opening the bonnet.
Opening the bonnet
Lift the bonnet, guiding it up, and it will rest in position with the help of two struts 2.
Before carrying out any action in the engine compartment, you must switch off the ignition. STARTING, STOPPING THE ENGINE: vehicle with key STARTING, STOPPING THE ENGINE: vehicle with card.
Do not press down on the bonnet: there is a risk that the bonnet may accidentally close.
When working in the engine compartment, ensure that the windscreen wiper stalk is in the park position.
Risk of injury.
Please note when working close to the engine that it may be hot. In addition, the engine cooling fan may come on at any moment. The label in the engine compartment reminds you of this.
Risk of injury.
Closing the bonnet
Check that nothing has been left in the engine compartment.
To close the bonnet again, hold the bonnet in the middle and guide it down, allowing a 30 cm gap before it is closed, then release it. It will latch automatically under its own weight.
After any procedure in the engine compartment, make sure that you do not forget anything (cloth, tools, etc.).
These may damage the engine or cause a fire.
Ensure that the bonnet is properly locked.
Check that nothing is preventing the catch from locking (gravel, cloth, etc.).
In the event of even a slight impact involving the radiator grille or bonnet, have the bonnet lock checked by an authorised dealer as soon as possible.