DRIVER’S SEAT WITH ELECTRIC CONTROLS
On vehicles that are equipped, the switch 1 can be used to access the “Seats” menu on the multimedia screen (see following pages).
Adjusting the seatback
To tilt the seatback, move the top of switch 2 forwards or backwards.
Adjusting the lumbar support on the driver’s seat
Move the switch 3 forwards, backwards, up or down.
Adjusting the seat position
To move the seat forwards or back
Move switch 4 forwards or backwards.
To raise or lower the seat base
Move the back of switch 4 up or down.
To tilt the seat base
(depending on the vehicle)
Move the front of switch 4 upwards or downwards.
With the ignition on:
- Pressing the switch 5 on the required seat for the first time activates the heating system on high. Both switch indicator lights are illuminated;
- pressing the switch for the second time changes the heating to low. Only one indicator light is illuminated;
- pressing for the third time turns the heating off.
For safety reasons, carry out any adjustments when the vehicle is not being driven.
We would advise you not to recline the seatbacks too far to ensure that the effectiveness of the seat belts is not reduced.
No object should be placed on the floor (in front of the driver). such objects may slide under the pedals during sudden braking manoeuvres and obstruct their use.