Back to the list

VEHICLE SETTINGS CUSTOMISATION MENU

  • 1
  • 2
  • 3
  • 4
  • 5

Depending on the vehicle equipment, this function allows you to activate/deactivate and adjust some of the vehicle’s functions.

Vehicles fitted with a multimedia screen 1

Accessing the settings menu

Refer to the multimedia instructions for information on accessing the various settings.

Adjusting the settings

Select a menu then the function to be modified (the display depends on the vehicle equipment and country):

a) “Driving”:

- Indicator volume.

b) “Access”:

- Unlocking the driver’s door;

- Lock doors during driving;

- Opening/closing in hands-free mode;

- Remote locking/approach unlocking;

- Distance locking sound;

- Silent mode;

- Automatic locking.

c) “Wiping and lighting”:

- Follow-me-home lighting;

- Wiping in reverse;

- Automatic front wiping;

- Wipe after wash.

d) “Welcome”:

- External welcome;

- Automatic fold-out of mirrors;

- Interior welcome;

- Courtesy light auto mode.

Depending on the function, select:

- “ON” or “OFF” to activate or deactivate;

or

- a duration to adjust the time the lights are switched on (e.g. for the “Follow-me-home lighting” function).

Please refer to the multimedia instructions for further information.

For safety reasons, carry out any adjustments when the vehicle is stationary.

Vehicles not fitted with a multimedia screen

Access the settings menu on the display 2 on vehicles fitted with an instrument panel A

With the vehicle stationary, press switch 3 as many times as required to reach the “Vehicle” tab.

Press repeatedly on the 4 or 5 switch to access the “Settings” menu, then confirm by pressing 6OK”.

Access the settings menu on the display 2 on vehicles fitted with an instrument panel B

With the vehicle stationary, press the 3 switch as many times as required to reach the “Settings” world, then press 6OK” to confirm.

Press the 4 or 5 control repeatedly to reach the “Vehicle setting” menu, then press the 6OK” switch to confirm.

Adjusting the settings

Navigate using the 4 or 5 control to select the function to be modified and press 6OK” to confirm (display may vary according to vehicle equipment and country):

a) “DASHBOARD”:

- Language;

- Unit;

- Style;

- Colour.

b) “VEHICLE”:

- Rear windscreen wiping in reverse gear;

- Automatic windscreen wiping;

- Front/rear drip wiping function;

- External welcome;

- Free-wheel in ECO mode;

- Indicator volume.

c) “PARKING ASSIST”:

- Beep sound volume;

- front obstacle detection;

- side obstacle detection;

- rear obstacle detection.

d) “DRIVING ASSIST”:

- Lane departure warning sensitivity;

- Lane departure warning vibration;

- Lane keeping assist sensitivity;

- Blind spot warning;

- Fatigue warning;

- Active braking;

- Overspeed warning;

- Distance warning.

e) “LIGHTING”:

- Courtesy light auto mode;

- Automatic follow-me-home lighting;

- Follow-me-home lighting: XX seconds.

f) “ACCESS”:

- Lock doors during driving;

- Opening/closing in hands-free mode;

- Unlocking the driver’s door only;

- Automatic re-locking;

- Silent locking;

- Automatic opening/closing;

- Automatic deployment of door mirrors.

g) “RESET”.

= function activated

< function deactivated

Once a line has been selected, press 6OK” to adjust the function.

If you select either “PARKING ASSIST” then “VOLUME”, or “DASHBOARD” then “LANGUAGE”, you will have to make a further selection (sound volume of the parking distance control or instrument panel language).

In this case, make your selection and confirm it by pressing 6OK”, the selected value is shown by a = in front of the line.

To exit the menu, press the 4 or 5 switch to access “BACK” and confirm by pressing 6OK”.

It may be necessary to carry out this operation more than once.

The vehicle settings personalisation menu cannot be used when driving.

At a speed exceeding 12 mph (20 km/h), the instrument panel display switches automatically back to trip computer and warning system mode.