FRONT SEATS WITH MANUAL CONTROL

  • 1
  • 2
  • 3
  • 4
  • 5

To move the seat forwards or back

Lift handle 1 to release. Release the handle at the desired position and make sure that it is locked.

Adjusting the lumbar support on the driver’s seat

(depending on the vehicle)

Push the 2 switch forwards or backwards to adjust the lumbar pad.

To raise or lower the seat base

Move lever 3 as many times as necessary upwards or downwards.

To tilt the seatback

Lift handle 4 as far as possible and tilt the seatback to the desired position. Release the handle at the desired position and make sure that it is locked.

After making adjustments, make sure that the seatbacks are correctly locked in place.

For safety reasons, carry out any adjustments while the vehicle is stationary.

We would advise you not to recline the seatbacks too far to ensure that the effectiveness of the seat belts is not reduced.

Nothing should be placed on the floor area in front of the driver as such objects may slide under the pedal during braking manoeuvres, thus obstructing its use.

Heated seats

Depending on the vehicle, with the ignition on, you can activate the heated seats via the multimedia screen 5:

- pressing the ð pictogram on the required seat for the first time activates the heating system at maximum power. Three integrated switch warning lights come on;

- a second press decreases the heating to medium power. Two integrated warning lights come on;

- a third press decreases the heating to minimum power. One integrated warning light comes on;

- a fourth press turns the heating off.

In order to avoid unnecessary energy consumption, the heated passenger seat can be deactivated automatically in the absence of an occupant.

“Favourites” function

Depending on the vehicle, by pressing the steering wheel control 6, you can activate the heated seats according to the stored use settings that you have previously defined.

For more information on programming this function, please refer to the multimedia instructions.