Back to the list

WIPER BLADES: replacement

  • 1
  • 2
  • 3
  • 4
  • 5

Replacing windscreen wiper blades 2

To replace the wipers, first put them in the service position B.

With the ignition on and the engine stopped:

- set the stalk 1 to position A twice in succession (single sweep): the wiper blades will stop in the service position B away from the bonnet;

- press the button 4 firmly then remove the blade upwards.

To refit

To refit the wiper blade 2, insert it in its housing in the arm 3, then clip it until you hear a click. Make sure that the blade is correctly locked in position.

To return the blades to lowered position, make sure that the blades are folded down onto the windscreen then set the 1 stalk to position A (single sweep): the windscreen wiper blades will fold into the bonnet when the ignition is switched on.

Keep monitoring the condition of the wiper blades. How long they last depends on you:

- clean the blades and the windscreen regularly with soapy water;

- do not use them when the windscreen is dry;

- free them from the windscreen when they have not been used for a long time.

Rear screen wiper blade 5

Stalk in stop position (deactivated):

- lift the wiper arm 6;

- pivot the rear screen wiper blade 5 (C movement) until it unclips;

- release rear screen wiper blade 5 by pulling on it.

To refit

To refit the wiper blade, proceed in reverse order to removal. Make sure that the blade is correctly locked in position.

Keep monitoring the condition of the wiper blades. How long they last depends on you:

- clean the blades and the windscreen regularly with soapy water;

- do not use them when the windscreen is dry;

- free them from the windscreen when they have not been used for a long time.

- In frosty weather, make sure that the wiper blades are not stuck by ice (to avoid the risk of the motor overheating).

- Check the condition of the wiper blades.

They should be replaced as soon as they become less efficient: approximately once a year.

When changing the blade, when it has been removed, do not let the wiper arm fall against the window: risk of breaking the window.

Before changing the rear wiper blade, make sure the stalk is in the stop position (deactivated).

Risk of injury.