REAR SEATS
To move the seats forwards or backwards
Lift lever 1 to unlock the seat. Once in the desired position, release the lever and check that the seat is correctly locked.
To tilt the seatback
Move the seat forwards if necessary.
Lift handle 2 and tilt the seatback to the desired position.
Release the handle 2 and ensure that the seatback is fully locked into position.
To fold down the seatback (flat-floor position)
Lower the headrest 3 and lift the handle 2 to fold down the seat. Make sure the seat is correctly locked in position.
Note: before folding down the seatback, check that no device is plugged into the sockets 4.
To raise the seatback
Be sure to position the seat belt correctly, hold the seatback, lift and ensure that it is correctly locked.
For safety reasons, carry out any adjustments when the vehicle is not being driven.
When moving the rear seats, ensure that nothing obstructs the anchorage points (passenger’s arm or leg, a pet, gravel, cloth, toys, etc.).
To access the third row rear seats
- Lift the handle 5;
- Hold the seatback and lower it at the front until it locks;
- sit in the third row rear seat;
- hold the second row seatback and fold it down;
- Make sure the seat is correctly locked in position.
To unfold a seat in the third row
- Access the third row seats;
- place seat belt in hook 6 to avoid damaging it;
- Pull the strap 7 to lift the seatback. Check that the bonnet is correctly locked.
Before moving a second row seat forwards, ensure that the seat is not in the flat-floor position.
When refitting the seatback, make sure it is correctly locked in place.
If seat covers are fitted, make sure these do not prevent the seatback latch from locking in.
Make sure that the seat belts are positioned correctly.
Reposition the headrests.
When moving the rear seats:
- check that no one is near to any of the moving parts;
- check that there is sufficient space around the seat;
- check that nothing is obstructing the section of the boot reserved for storing the seat;
For safety reasons, carry out any adjustments when the vehicle is stationary.
To get out of the third row rear seats
- Lift the lever 8;
- guide the seat forwards until it locks.
Note: If the lever 8 does not work, pull the emergency exit strap 9.
Using the emergency exit strap 9 causes the second row rear seats to move backwards. During the operation, ensure that nothing is obstructing the movement of the seat (body parts, pets, toys etc.).
For safety reasons, carry out any adjustments when the vehicle is stationary.
Risk of injury.
To fold down a third row seat manually
- From the luggage compartment, lower the headrest;
- pull strap 10. Depending on the vehicle, it is located above or below the false floor 11.
To automatically fold down the seats (flat position)
The rear seats are electrically unlocked to fold down in order to create a flat floor.
There are two ways to manoeuvre the seats:
- from the boot using control 12;
- from the multimedia screen 13.
Conditions of use
With the vehicle at a standstill and the rear seat belts unlocked:
- from control 12, with the boot lid open;
- from the multimedia screen 13, with the engine running.
Note: Before performing any unlocking operations to fold down the seats, the trays on the back of the front seats must be folded away.
Disabling the function
- With the engine running, a buckled seat belt prevents the movement of the relevant seat.
- Once the vehicle is moving the two controls are deactivated.
To raise the seats manually
Raise each seat as described on the previous pages.
When moving the rear seats:
- check that no one is near to any of the moving parts;
- check that there is sufficient space around the seat;
- check that nothing is obstructing the section of the boot reserved for storing the seat;
For safety reasons, carry out any adjustments when the vehicle is stationary.
Using control 12
Depending on the vehicle, folding switches:
A the rear left seatback in the second row.
B the rear centre and right-hand seatbacks in the second row.
C the rear right seatback in the third row.
D the rear left seatback in the third row.
E all seats.
From the multimedia screen 13
With the vehicle at a standstill, select menu “Vehicle”, “Seats” then “One-touch folding”.
Press on the seat you wish to fold away, or on all seats, then confirm.
For safety reasons, carry out any adjustments when the vehicle is not being driven.
Encountering an obstacle
While being moved, if a seat encounters an obstacle, the movement stops of its own accord. You will then have to manually fold back the seat after removing the obstacle.
Operating fault
If all user conditions have been fulfilled and the folding action still fails to operate, please contact an authorised dealer.
When moving the rear seats, ensure that nothing obstructs the anchorage points (passenger’s arm or leg, a pet, gravel, cloth, toys, etc.).
Use restriction
It is not permitted to drive with a second row rear seatback or seat folded down when there is a passenger occupying a third row rear seat.
