Journey settings

  • 1
  • 2
  • 3
  • 4
  • 5

Journey settings

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
Examples of selections
Interpreting the display selected
No stored message
a) Trip log.
Successive display:
  • information messages (passenger airbagOFF etc.);
  • operating fault messages (check the injection system, etc.).
7.4 L/100
b) Current fuel consumption.
This value is displayed after a speed of approximately 19 mph (30 km/h) is reached.
5.8 L/100
Average fuel consumption since the last reset.
The value is displayed after having travelled at least 400 metres since the last reset.
112,4 km
c) Trip mileage recorder: distance travelled since the last reset.
Reset tyre pressure, press and hold
d) Reset the tyre pressuresTYRE PRESSURE LOSS WARNING.
16 :30
e) Set the time.
Examples of selections
Interpreting the display selected
On-board computer with mileage-before-service message
Service in 18,641 miles (30,000 km)/12 months
d) Mileage before service and oil change.
Service distance
With the ignition on and the engine not running, access the "Mileage before service" information. When the distance or time value approaches its limit, there are several possible scenarios:
  • mileage remaining less than 932 miles (1,500 km) or one month: the "Service due in" message is displayed accompanied by the nearest limit (distance or time);
  • range equal to 0 miles (0 km) or date of service reached: the message "Service required" is displayed accompanied by the warning light .
The vehicle requires a service as soon as possible.
Service due in less than 186 miles (300 km) or 24 days
Service vehicle
Resetting: to reset the mileage before the next service, press and hold the OK button for approximately 10 seconds until the display shows the mileage before service permanently.
Note: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.
Oil change in 18,641 miles (30,000 km)/24 months
Mileage before oil change
With the ignition on and the engine not running, access the "Mileage before service" information to display the mileage before the next oil change.
Depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low speed, door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the next oil change can therefore decrease more quickly in some cases than the actual distance travelled.
Reset: to reset the distance before the next service, press and hold button OK for approximately 10 seconds until the display shows the mileage before oil change permanently.
Note: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.