Back to the list
My Safety
My Safety
The "My Safety" function can be used to deactivate or activate a set of driver assistance functions
simultaneously.
Depending on the vehicle, you can configure the "My Safety" function from the multimedia screen by selecting the driving aid functions to be
switched off as a group.
Operation
"All on" mode
Depending on the vehicle, the functions and configurations of driving assistance concerned
are:
- overspeed sound alert DETECTION OF ROAD SIGNS;
- lane departure prevention LANE DEPARTURE PREVENTION;
- driver vigilance warning DRIVER VIGILANCE WARNING;
- emergency lane departure prevention EMERGENCY LANE DEPARTURE PREVENTION.
When the "All ON" mode is activated: the indicator light on the button 1 lights up and the "My Safety All ON selected" message is displayed on the instrument panel to confirm this. The driving aids that
are available in the mode are activated.
"Custom" mode
You can use this mode to deactivate or reactivate certain driving aids that are available in the "All ON" mode previously configured
using the "MY SAFETY PERSO" setting.
With the ignition on, press the switch 1 twice in quick succession. On the first press, the "Press again for My Safety Custom" message is displayed on the instrument panel. On the second press, the warning light
on the switch 1 goes out. The "Custom" mode is activated. The "My Safety Perso selected" message is displayed on the instrument panel.
To switch back to "All ON" mode, press once on the button 1. The indicator light on the button 1 lights up.
Tip
Depending on the length of time following the last time the engine was stopped, the
alerts are reactivated:
- when the vehicle is unlocked;
or
- when a door is opened;
or
- when the engine is restarted.
Perso mode configuration
From the multimedia screen 2
Refer to the multimedia instructions for information on accessing the settings.