Back to the list
Bonnet
Bonnet
WARNING
Before carrying out any action in the engine compartment, you must switch off the
ignition STARTING, STOPPING THE ENGINE.
WARNING
Please note when working close to the engine that it may be hot. The engine cooling
fan may also start at any moment. The label in the engine compartment reminds you of this.
Risk of injury.
WARNING
When working in the engine compartment, ensure that the windscreen wiper stalk is
in the park position.
Risk of injury.
WARNING
Avoid placing any pressure on the engine bonnet: risk of the bonnet closing by accident.
WARNING
In the event of even a slight impact involving the radiator grille or bonnet, have
the bonnet lock checked by an approved dealer as soon as possible.
WARNING
After any procedure in the engine compartment, make sure that you do not forget anything
(cloth, tools, etc.).
Otherwise, this may lead to engine damage or cause a fire.
Unlocking the bonnet catch
To open, pull the handle 1.
To unlock, push the tab 2 to the left as you open the bonnet.
Opening the bonnet
Lift the bonnet, helping it up, and it will rest in position with the help of struts.
Closing the bonnet
Check that nothing has been left in the engine compartment.
To close the bonnet again, hold the bonnet in the middle and lower it to 30 cm above
the closed position, then release it. It will latch automatically under its own weight.
WARNING
Ensure that the bonnet is properly locked.
Check that nothing is preventing the catch from locking (gravel, cloth, etc.).