Clock and outdoor temperature
Clock and outdoor temperature
Tip
If the power supply is cut (battery disconnected, supply wire cut, etc.), the clock
must be reset.
We recommend that you do not adjust these settings while driving.
Vehicles fitted with a multimedia screen.
The time and outdoor temperature are displayed on the multimedia screen 1.
Refer to the multimedia instructions.
Vehicles not fitted with a multimedia display screen A
Press the switch 2 as many times as required to reach the "Vehicle" tab.
Repeatedly press control 3 or 4 to access the time setting function 6.
Press and hold switch 5 "OK" until the time flashes.
Set the hour using control 3 or 4, then press the switch 5 "OK" to confirm.
Set the minutes using control 3 or 4, then press the switch 5 "OK" to confirm.
Vehicles not fitted with a multimedia display screen B
Press the switch 2 as many times as required to reach the "Settings" world.
Repeatedly press control 3 or 4 to reach the "Time setting" menu then press switch 5 "OK".
Press and hold switch 5 "OK" until the time flashes.
Set the hour using control 3 or 4, press switch 5 "OK" to confirm, then set the minutes using control 3 or 4 and press switch 5 "OK" to confirm.
Tip
Depending on the vehicle, If the electrical supply is cut (battery disconnected, broken
supply wire, etc.), the clock will automatically go back to the right time after a
few minutes once the system is capable of receiving information GPS.
Exterior temperature indicator
Tip
Depending on the vehicle, If the electrical supply is cut (battery disconnected, broken
supply wire, etc.), the clock will automatically go back to the right time after a
few minutes once the system is capable of receiving information GPS.
WARNING
Exterior temperature indicator
As ice formation is related to climatic exposure, local air humidity and temperature,
the external temperature alone is not sufficient to detect ice.
Special feature:
When the external temperature is between -3°C and +3°C, the °C characters flash (indicates risk of ice).