Back to the list


  • 1
  • 2
  • 3
  • 4
  • 5

Display A

To access the display 2 for setting the time, press button 3 or 4 on the stalk 1.

Wait a few seconds; the hours and minutes will begin to flash. You are now in setting mode, press and hold button 3 or 4 to set the hour.

Once the minutes flash, repeatedly press or press and hold button 3 ou 4 to set the time.

Wait a few seconds, the minutes will flash: repeatedly press or press and hold button 3 or 4 to set the time.

When setting is complete, the hours and minutes remain displayed continuously for 5 seconds: your setting is registered.

You may change the display.

If the power supply is cut (battery disconnected, supply wire cut, etc.), the clock must be reset.

We recommend that you do not adjust these settings while driving.

Display B

Vehicles fitted with touch-screen multimedia, navigation aid systems, telephones, etc.

Refer to the separate instructions for the function to understand the special features of this equipment.

External temperature indicator

Special note:

When the exterior temperature is - 3°C to + 3°C, the °C characters flash (signalling a risk of ice on the road).

External temperature indicator

As ice formation is related to climatic exposure, local air humidity and temperature, the external temperature alone is not sufficient to detect ice.