Back to the list

ELECTRIC VEHICLE: charging programming

  • 1
  • 2
  • 3
  • 4
  • 5

This function sets the start time for charging.

From the multimedia display 1

(depending on the vehicle)

Programming the function start time

Select “Menu”, “Vehicle”, “Electrical vehicle”, “Charge scheduler”.

You can choose:

- an instant charge start;

- a daily schedule;

- a weekly schedule.

Confirm your choice by selecting “Done”.

Daily

On the menu A, press “Change ” and set the charging start and end times, then press “Select ” to confirm.

Weekly

On the menu B, press “Change” and set the charging start and end times for each weekday, then press “Select ” to confirm.

NB: When the programming is confirmed, the warning light comes on on the instrument panel.

On the instrument panel 2

(depending on the vehicle)

Programming the function start time

You can programme a single time.

- briefly press button C or D to access the menu “PROGRAMMING”;

- press and hold button C or D to confirm;

- briefly press button C or D to access the menu “SETTINGSSTART LOAD”;

- press and hold button C or D to confirm;

- briefly press button C or D to access the clock settings;

- hold down button C or D - the hours flash;

- press buttons C and D to set the hour;

- hold down button C or D to confirm the hour setting;

- the minutes flash - press buttons C and D to set the minutes;

- hold down button C or D to confirm the minutes setting. Your settings are now saved.

NB: When the programming is confirmed, the warning light comes on on the instrument panel.

Charge start

Charging starts at the set time:

- if the ignition is switched off;

- The gear lever should be in position P;

- if the vehicle is connected to a power supply.