ELECTRIC VEHICLE
| “Programming” menu |
From the “Settings” menu, then the “Vehicle” tab, open the “Programming” menu to configure vehicle charging, from the “Charge” 6, to programme comfort temperatures, from the “Climate” 5 tab, and see all of your settings from the “Calendar 4” tab. Fields A, B and C display dates, times and activated programmes. Note: charging will start if the engine is shut down and the vehicle is connected to a power supply and access is authorised. | |
Charging programming
Immediate charging 1
Once your vehicle is connected to a power source, charging starts.
Area A informs you that “Immediate charging” is activated.
Immediate charging starts as soon as the scheduled time for deferred charging is reached.
“Postponed charging” 2
Even though your vehicle is connected to a power source, you can programme the start time for charging.
Press “Edit” 7 to open the settings to set the start time for charging.
Set the start time for charging then press “Close” to confirm.
Field B shows the programmed time for charging to start.
“Program” 3
You can save several programmed charging times per week.
Programmed times are displayed in field C.
Press “Edit” 8 to open the programming configuration settings.
Select the programme time 9 that you wish to change to access the settings.
Set the charging start 11 and end 12 times as well as the days 13 to which these times will apply, then press “Close” 14.
To confirm, press the return button 10 after ensuring that the desired program is set to “ON”.
To deactivate a program, press “OFFˮ.
Note:
- if the start and end times are identical, the charging period is 24 hours;
- you cannot confirm a charging programme if you do not select a day of the week.
For safety reasons, carry out these operations when the vehicle is stationary.
Comfort programme
From the “Climate” tab 5, you can activate/deactivate the “Comfort programs” or set the comfort temperature and time.
Programmed times are displayed in area D.
Nota: the minimum time period between each schedule is 2 hours.
Press “Edit 16” to access the comfort settings.
You can save several “Comfort programs”.
From this menu, you can adjust the temperature 17 (depending on the equipment) and activate/deactivate the “Comfort programs” saved by pressing the 18 button.
Select the programme time 19 that you wish to change to access the settings.
Note: the selected temperature is displayed on the menu 15.
Calendar
From the “Calendar 4” tab, you can see an overview of all the active charging and comfort programmes.
If immediate charging is activated, the histogram will be filled with the charging colour.
If deferred charging is activated, the charging progress colour is displayed once the charging start time is reached.
Press a day on the calendar to view your settings.
| “Energy info” menu |
From the “Car info” menu, then the “Vehicle” tab, access the “Energy info” menu to view the vehicle’s energy consumption. Note: information may vary, depending on the vehicle’s engine (electric or hybrid). | |
Histogram
From the “Histo 23” tab, you can view the vehicle’s energy consumption over the last fifteen minutes of driving in the form of a graph:
- the periods of energy consumption;
- the periods of energy recovery to recharge the traction battery.
Note: depending on the multimedia screen, additional information is shown below the graphic.
Press the graphic to view your energy consumption information.
Your multimedia system manual can be accessed via the pop-up menu 20.
“List”
From the “List” tab 22, the multimedia system displays the various consumption figures on your journeys since the last reset:
- “Distance travelled in electric mode”;
- “Average speed”;
- “Average electric consumption”;
- “Total consumption” (of fuel and/or electricity);
- total consumption for air conditioning;
- total energy recovered;
-...
“Flow”
From the “Flow” tab 21, you can use the multimedia system to display a diagram of the vehicle showing when the vehicle is consuming energy or recovering it to recharge the traction battery.
