Back to the list

REVERSING CAMERA

  • 1
  • 2
  • 3
  • 4
  • 5

“Rear-view camera” menu

From the main menu, select “Settings”, then the “Vehicle” tab followed by “Parking assistance”. Use this menu to configure the reversing camera.

For further information on the reversing camera, please see your owner’s handbook.

Note:

- make sure that the cameras are not obscured (by dirt, mud, snow, etc.);

- the reversing camera display is no longer available (it is replaced by a black screen) when the vehicle speed is above approximately 6 mph (10 km/h), depending on the local legislation. A message appears on the screen to warn you that your speed is too high.

“Guide lines”

You can activate or deactivate:

- the fixed guide lines 5 indicating the distance behind the vehicle;

- the moving guide lines 4 indicating the vehicle’s trajectory according to the steering wheel position.

“Image settings”

You can adjust the following settings:

- brightness 1;

- contrast 2;

- colour 3.

For safety reasons, carry out these operations when the vehicle is stationary.