Back to the list
Front seats
Front seats
Adjusting seat A
To move a seat forwards or backwards
Depending on the vehicle, raise the handle 1 to unlock. Release the handle once the seat is in the correct position and ensure
that the seat is locked.
To adjust the height of the seat base
Lower or pull the lever 2 as many times as is necessary to lower or raise the seat base.
To tilt the seatback
Handle the lever 3.
Lumbar adjustment
(depending on the vehicle)
Turn the control knob 4 to increase or decrease the support.
WARNING
After making adjustments, make sure that the seatbacks are correctly locked in place.
Heated seats
(depending on the vehicle)
With the ignition on, press the switch 5:
- once to activate the maximum temperature, the two built-in indicator lights will light up;
- a second time to switch to the intermediate temperature, only one indicator light remains lit;
- a third time to deactivate the heated seat function, both indicator lights are switched off.
WARNING
For safety reasons, carry out any adjustments while the vehicle is stationary.
We would advise you not to recline the seatbacks too far to ensure that the effectiveness
of the seat belts is not reduced.
Nothing should be placed on the floor (area in front of the driver) as these objects
may slide under the pedals during sudden braking manoeuvres, thus obstructing their
use.
Adjusting seat with suspension B
To move a seat forwards or backwards
Raise the handle 6 to unlock it. Release the handle at the desired position and make sure that it is
locked.
To tilt the seatback
Raise the handle 7 and tilt the seatback to the desired position. Release the handle at the desired
position and make sure that it is locked.
To adjust the height of the seat base
Move the lever 8 as many times as necessary upwards or downwards.
Lumbar adjustment
Rotate the control knob 9 to increase or decrease the support.
To adjust the seat suspension
With the vehicle stationary, turn the control knob 10 to the right to stiffen the suspension or to the left to slacken it. The value of
the indicator light 11 should represent your average weight.
Adjusting the pivoting seat C
To move the seat forwards or back
Raise the handle 12 to unlock it. Release the handle at the desired position and make sure that it is
locked.
To tilt the seatback
Raise the handle 14 and tilt the seatback to the desired position. Release the handle at the desired
position and make sure that it is locked.
Adjusting the height of the armrests
- upwards – raise the armrest 15 to the desired position;
- downwards – raise the armrest 15 to the storage position along the seatback, then lower it.
Lumbar adjustment
Turn the control knob 16 to increase the support.
To pivot the seats
Tip
Be sure to always open the door next to the seat before swivelling it.
Risk of damage.
- Detach the seat belt buckle from its catch;
- lower the sun visor;
- raise the armrests;
- apply the parking brake;
- move the seat as far back as possible;
- adjust the seatback to the upright position;
- open the door;
- pull the handle 13 towards the inside of the vehicle and rotate the seat to unlock it from its "forward-facing" position.
Returning to the driving position
- Pivot the seat to the "forward facing" position;
- make sure the seat is correctly locked in position;
- adjust the seat to your driving position.
WARNING
The "rear-facing" seat position must only be used while the vehicle is stationary
and the engine is off.