Back to the list
Safe distance alert
Safe distance alert
Using the information from the camera 1, this function informs the driver of the time interval between their vehicle and
the vehicle in front so that a safe stopping distance between the two vehicles can
be maintained.
The function is activated when the vehicle speed is between about 19 and 106 mph (30
and 170 km/h), depending on the vehicle.
WARNING
This function is an additional driving aid. This function is not under any circumstances
intended to replace the due care and attention of the driver, who should at all times
be in control of the vehicle.
Location of the camera 1
Make sure the windscreen is not obscured (by dirt, mud, snow, condensation etc.).
Activation/deactivation
Tip
Depending on the vehicle, according to the length of time following the last time
the engine was stopped, the function is reactivated:
- when the vehicle is unlocked;
or
- when a door is opened;
or
- when the engine is restarted.
Vehicles fitted with a multimedia screen 2
From the "Vehicle" world on your multimedia screen 2, press the "Driving aids" menu.
Activate or deactivate the "Safe distance" function.
Activating/deactivating the system from the trip computer 3
(depending on the vehicle)
- With the vehicle stationary, press the switch 4 as many times as required to reach the tab or, depending on the vehicle, the tab;
or
- press switch 4 and repeatedly press control 5 or 6 to reach the tab;
- depending on the vehicle, press switch 7 OK;
- repeatedly press control 5 or 6 to reach the menu, then press switch 7 OK;
- repeatedly press control 5 or 6 to reach the "DRIVING ASSIST" menu, then press switch 7 OK;
- repeatedly press control 5 or 6 to reach the "Distance warning" menu, then press switch 7 OK;
- press switch 8 OK again to activate or deactivate the function:
- function activated
- function deactivated
Operation
With the function activated the 8 indicator appears on the instrument panel and informs the driver of the distance
between their vehicle and the vehicle in front.
- A
- (grey): function not operational.
- (green): no vehicle detected.
- B
- (green): the time interval is greater than or equal to around two seconds (distance between the two vehicles adapted to your speed).
- C
- (yellow): the time interval is between approximately one and two seconds (insufficient distance between the two vehicles).
- D
- (red): the time interval is less than or equal to approximately one second (very insufficient distance between the two vehicles).
If the interval between the two vehicles is less than approximately 0.5 seconds, the
indicator light 8, display D, will appear in red on the instrument panel.
Under certain conditions, the time interval may not be displayed:
- while cornering;
- when changing lane;
- if the vehicle in front is sufficiently far or outside the range of the camera.
WARNING
The measurement is displayed for information: the system does not carry out any action
on the vehicle.
This function is not designed for use in urban conditions or for a dynamic driving
style (sudden cornering, acceleration, braking, etc.), but rather for stable driving
conditions.
The function does not interact with the braking system.
The camera zones should be kept clean and free of any modifications in order to ensure
the proper operation of the system.
Warning
WARNING
This function is an additional driving aid. This function is not under any circumstances
intended to replace the due care and attention of the driver, who should at all times
be in control of the vehicle.
System servicing/repairs
- In the event of an impact, the camera alignment may be changed and its operation may consequently be affected. Deactivate the function and consult an authorised dealer.
- Any work in the area where the camera is located (repairs, replacements, windscreen modifications etc.) must be carried out by a qualified professional.
Only an authorised dealer is qualified to service the system.
In the event of system disturbance
- Windscreen obscured (by dirt, ice, snow, condensation etc.).
- A complex environment (metal bridge, tunnel, etc.).
- Poor weather conditions (snow, hail, black ice, etc.).
- Poor visibility (night, fog, etc.).
- Poor contrast between the vehicle in front and the surrounding area (e.g. white vehicle in a snowy area, etc.);
- Being dazzled (glaring sun, lights of vehicles travelling in the opposite direction; etc.).
- The road is narrow, winding and undulating (tight bends, etc.)
Risk of erroneous and false alarms.