Back to the list

Tools

  • 1
  • 2
  • 3
  • 4
  • 5

Tools

Location of the tool kit

The tool kit 1 is located under the driver's seat.
To remove the tools, move the seat forward and fold down the seatback FRONT SEATS.
Depending on the vehicle, the cover 2 has to be removed to access the tool kit. Press on the tabs 3 and pull the cover towards you to detach it.
Once the tool kit is back in place, be sure to replace the cover securely.
Note: When storing the tool kit again, push it with one hand and guide it with the other to ensure that it is properly locked into place. Be sure to push the kit in until it locks.
WARNING
Nothing should be placed on the floor (area in front of the driver) as these objects may slide under the pedals during sudden braking manoeuvres, thus obstructing their use.

Contents of the tool kit

(depending on the vehicle)
  • Hydraulic jack 4;
  • towing ring 5;
  • hubcap tool 6;
  • wheelbrace 7;
  • winch unlocking key 8;
  • hexagonal extension piece 9;
  • extension pieces 10;
  • jack 11.
WARNING
For your safety, the use of a jack not recommended by the manufacturer is strictly prohibited.
The jack is specific to the vehicle and used to change the wheels.
Under no circumstances should it be used:
  • on another vehicle;
  • to carry out a repair;
  • to access the underside of the vehicle.
Risk of injury.
Risk of damage to the vehicle.
WARNING
Do not leave the tools unsecured inside the vehicle as they may be projected during braking. After use, check that all the tools are correctly clipped into the tool kit, then position it correctly in its housing to reduce any risk of injury.
If bolts are supplied with the emergency spare wheel, you must use these bolts only for the emergency spare wheel.