TRIP COMPUTER: general information

  • 1
  • 2
  • 3
  • 4
  • 5

Trip computer A, B or C

Depending on the vehicle, this includes the following functions:

- distance travelled;

- journey settings;

- information messages;

- operating fault messages (connected to the © warning light);

- warning messages (connected to the ® warning light);

- vehicle settings customisation menu VEHICLE SETTINGS CUSTOMISATION MENU.

All these functions are described on the following pages.

Vehicle fitted with Ainstrument panel

The functions are distributed in zones 5, 6, 7, and 8.

Press the 1 switch to browse between menus and select functions by repeatedly pressing switch 2 or 3, then if necessary use the 4 switch to confirm “OK”.

Vehicle fitted with instrument panel B or C

Press the 1switch as many times as required to reach the “Vehicle” tab.

Press repeatedly using the 2 or 3 control, then if necessary use the 4 switch to confirm “OK”.

Selections

(the display depends on the vehicle equipment and country)

a) Trip log, operating faults and information message readout;

b) current fuel consumption and average fuel consumption;

c) trip mileage recorder and average speed;

d) Reset the tyre pressure;

e) set the time;

f) distance before service;

- Distance before service;

- Distance before oil change;

g) Estimated range with remaining reagent.

Resetting the trip mileage recorder and journey parameters (reset button)

With one of the trip parameters selected as the display, press and hold the 4 switch “OK” until the display resets to zero.

Automatic resetting of the journey parameters

Resetting occurs automatically when the maximum value of any of the parameters is exceeded.

Interpreting some of the values displayed after resetting

The values showing average fuel consumption, range and average speed will become more stable and reliable the further you travel after pressing the reset button.

For the first few miles after pressing the reset key you will notice that the range increases as you travel. This range takes into account the average fuel consumption since the last time the reset button was pressed. Therefore, the average fuel consumption may decrease when:

- the vehicle stops accelerating;

- the engine reaches its operating temperature (if the engine was cold when the reset key was pressed);

- when driving from an urban area onto the open road.

DASHBOARD