STARTING, STOPPING THE ENGINE: vehicle with key

  • 1
  • 2
  • 3
  • 4
  • 5

“Stop/steering lock applied” position “LOCK” 0.

To lock: remove the key and turn the steering wheel until the steering column locks.

To unlock: turn the key and the steering wheel slightly.

“On” position “ON” 2

The ignition is switched on: Any accessories (radio etc.) can be used.

“Start” position “START” 3

Starting the engine

- Press the brake pedal;

- position the gear lever to the position P only ;

- turn the key to the “START” position 3 then release it.

The “READY” message appears on the instrument panel, accompanied by a beep. As soon as the “READY” message stops flashing and the beep stops, the vehicle is ready to drive.

Never switch off the ignition before the vehicle has stopped completely. Once the engine has stopped, the brake servo, power-assisted steering etc., and the passive safety devices such as the airbags and pretensioners will no longer operate.

Driver’s responsibility when parking or stopping the vehicle

Never leave an animal, child or adult who is not self-sufficient alone in your vehicle, even for a short time.

They may pose a risk to themselves or to others by starting the engine, activating equipment such as the electric windows or locking the doors, for example.

Also, in hot and/or sunny weather, please remember that the temperature inside the passenger compartment increases very quickly.

RISK OF DEATH OR SERIOUS INJURY.

The vehicle can only be started if the charging cord is unplugged from the vehicle.