Back to the list

My Safety

  • 1
  • 2
  • 3
  • 4
  • 5

My Safety

The "My Safety" function can be used to deactivate or activate a set of driver assistance functions simultaneously.
Depending on the vehicle, you can configure the "My Safety" function from the multimedia screen by selecting the driving aid functions to be switched off as a group.

Operation

"All on" mode

Depending on the vehicle, the functions and configurations of driving assistance concerned are:
When the "All on" mode is activated: the "My Safety All ON selected" message is displayed on the instrument panel to confirm this. The driving aids that are available in the mode are activated.

"Custom" mode

You can use this mode to deactivate or reactivate certain driving aids that are available in the "All on" mode previously configured using the "MY SAFETY PERSO" setting.
Once the ignition is on, press button 1 twice in succession to activate the "Custom" mode. On the first press, the "Press again for My Safety Custom" message is displayed on the instrument panel. On the second press, the indicator light on the button 1 goes out. The "Custom" mode is activated. The "My Safety Perso selected" message is displayed on the instrument panel.
To switch back to "All on" mode, press once on the button 1. The indicator light on button 1 lights up.
Tip
Depending on the vehicle, depending on the length of time following the last time the engine was stopped, the "All on" mode is reactivated:
  • when the vehicle is unlocked;
or
  • when a door is opened;
or
  • when the engine is restarted.

Perso mode configuration

WARNING
For safety reasons, carry out any adjustments while the vehicle is stationary.
Tip
The "MY SAFETY PERSO" settings saved for the "Custom" mode are stored when the engine was last stopped or when the doors were locked.

From the multimedia screen 2

Please refer to the multimedia instructions for more information.

My Safety