Back to the list
My Safety
My Safety
The My Safety function can be used to
deactivate or activate a set of driving assistance functions simultaneously.
Depending on the vehicle, you can configure the My Safety function from the multimedia screen by selecting the
driving aid functions to be switched off as a group.
Operation
"All
On"
mode
Depending on the vehicle, the functions and configurations of driving assistance
concerned are:
- lane departure prevention
- detection of road signs
- overspeed sound alert
- driver vigilance warning
When the
"All
On"
mode is activated:
the "My Safety All ON selected" message is displayed
on the instrument panel to confirm this. The driving aids that are available in the
mode
are activated.
"Perso" mode
You can use this mode to deactivate or reactivate certain driving aids that are available
in the
"All
On"
mode previously configured using the
"My
Safety
Perso"
setting.
Once the
ignition on,press
the button
1
twice
in quick succession.
On the first press, the "Press again for My Safety
Perso" message is displayed on the instrument panel. On the second press, the
warning light on the button
1 goes out. The "Perso" mode is activated. The "My Safety Perso selected" message is displayed on
the instrument panel.
To switch back to
"All
On"
mode, press the button 1
once. The indicator
light on the button 1 lights up.
Note
Depending on the length of time following the last time the engine was stopped, the
alerts are reactivated:
- when the vehicle is unlocked;
or
- when a door is opened;
or
- when the engine is restarted.
Perso mode configuration
From the multimedia screen 2
Please refer to the multimedia instructions for more information.