Back to the list

REAR LIGHTS AND SIDE LIGHTS: replacing the bulbs

  • 1
  • 2
  • 3
  • 4
  • 5

LED side light/brake light 1

Consult an approved dealer

Direction indicators 5

- Open the boot;

- remove the trim 2;

- unscrew the nut 3;

- release the light assembly from outside the vehicle by pulling towards the rear;

- remove the 4 bulb holder by unscrewing it a quarter of a turn, then replace the bulb.

Bulb type: WY16W.

Refitting

To refit, proceed in the reverse order, taking care not to damage the wiring.

The bulbs are under pressure and can break when replaced.

Risk of injury.

To comply with current legislation, or as a precaution, you can obtain an emergency kit from your approved dealer containing a set of spare bulbs and fuses.

Fog lights and reversing lights 6

Consult an approved dealer

High level brake light 7

Consult an approved dealer.

Number plate lights 8

- Unclip the light by pressing tab 9;

- remove the light cover to gain access to the bulb.

Bulb type: W5W.

The bulbs are under pressure and can break when replaced.

Risk of injury.

LED number plate lights 10

(depending on vehicle)

Consult an approved Dealer.

LED side repeaters11

(depending on vehicle)

Consult an approved dealer.

The bulbs are under pressure and can break when replaced.

Risk of injury.