TRIP COMPUTER: general information

  • 1
  • 2
  • 3
  • 4
  • 5

On-board computer 1

Depending on the vehicle, this includes the following functions:

- distance travelled;

- journey parameters;

- information messages;

- operating fault messages (associated with the © warning light);

- warning messages (associated with the ® warning light);

All these functions are described on the following pages.

Display selection keys 2

Scroll through the following information by repeated short presses on the control 2 (the display depends on the vehicle equipment and country):

a) total mileage and trip mileage recorder;

b) journey parameters:

- current fuel consumption;

- Estimated range with remaining fuel;

- distance travelled;

- average speed;

c) mileage before service;

d) tyre pressure reset;

e) trip log, operating faults and information message readout;

f) Estimated range with remaining reagent.

Trip mileage resetting

With “trip mileage recorder” selected on the display, press key OK 3 until the mileage recorder resets to zero.

Resetting the journey parameters (reset button)

with the display showing one of the trip settings, press key OK 3 until the display is reset to zero.

Interpreting some of the values displayed after resetting

The values showing average fuel consumption and average speed will become more stable and reliable the further you have travelled since the last time the Reset button was pressed.

The average fuel consumption may decrease when:

- the vehicle stops accelerating;

- the engine reaches its operating temperature (if the engine was cold when the reset key was pressed);

- when driving from an urban area onto the open road.

Automatic resetting of the journey parameters

Resetting occurs automatically when the maximum value of any of the parameters is exceeded.