CLOCK AND EXTERIOR TEMPERATURE
With the ignition on, the time and, depending on the vehicle, exterior temperature are displayed.
Setting the time
Setting clock A
On equipped vehicles, adjustment buttons 1 and 2 are used to set the clock.
Press button 1 to adjust the hours and button 2 to adjust the minutes.
Setting clock B
Display the “clock” page on the instrument panel by pressing one of the buttons on stalk 3.
After two seconds, the hours and minutes start flashing.
Press and hold the bottom button to enter the hour setting mode.
When only the hours flash, press the top button to scroll through them.
Press and hold the bottom button to enter the minute setting mode.
When only the minutes flash, press the top button to scroll through them.
Confirm by pressing and holding the bottom button on stalk 3.
If the power supply is cut (battery disconnected, supply wire cut, etc.), the clock must be reset.
We recommend that you do not adjust these settings while driving.
Resetting the clock C
Vehicles fitted with touch-screen multimedia, navigation aid systems, telephones, etc.
Refer to the separate instructions for the function to understand the special features of this equipment.
Exterior temperature
If the vehicle is suitably equipped, when the exterior temperature is between -3°C and +3°C, the °C characters flash (risk of black ice on the road).
Exterior temperature indicator
As ice formation is related to climatic exposure, local air humidity and temperature, the external temperature alone is not sufficient to detect ice.