Back to the list

FRONT HEADRESTS

  • 1
  • 2
  • 3
  • 4
  • 5

Headrest A

To raise the headrest

Pull it upwards to the required height.

To lower the headrest

Pull the tab 2 forwards, gently lift the headrest to unlock it and guide it down to the required height.

To remove the headrest

Raise it to its highest position. Press button 1 and lift the headrest to release it.

To refit the headrest

First, check that the headrest rods are clean and correctly aligned.

Pull the tab 2 forwards.

Insert the headrest rods in the holes, with the notches facing forwards (tilt the seat backwards if necessary).

Guide the headrest down to the desired height.

The headrest is an important safety component: ensure that it is in place and in the correct position. The distance between your head and the headrest should be as small as possible. The top of your head should be in line with the top of the headrest.

Headrest B

To raise the headrest

Pull it upwards to the required height.

To lower the headrest

Press button 3 and guide the headrest down to the desired height.

To remove the headrest

Raise it to its highest position. Press button 4 and lift the headrest to release it.

Note: when the headrest is removed, take care not to change the positions of the rods.

To refit the headrest

If the setting of the rods has been altered, pull them fully upwards. Take care to ensure they are clean and correctly aligned and, if there are any problems, check that the notches are facing forwards.

Insert the headrest rods into the holes (tilt the seatback backwards if necessary).

Lower the headrest until it locks, press button 3 and lower the headrest as far as possible.

The headrest is an important safety component: ensure that it is in place and in the correct position. The distance between your head and the headrest should be as small as possible. The top of your head should be in line with the top of the headrest.

Headrest C

To raise the headrest

Pull it upwards to the required height.

To lower the headrest

Press tab 5 and guide the headrest down to the desired height.

To remove the headrest

Raise it to its highest position. Press tabs 5 and 6 then lift the headrest to release it.

Note: when the headrest is removed, take care not to change the positions of the rods.

To refit the headrest

Press tab 5.

Insert the headrest rods in the holes with the notches facing forward, and guide the headrest down to the required height.

The headrest is an important safety component: ensure that it is in place and in the correct position. The distance between your head and the headrest should be as small as possible. The top of your head should be in line with the top of the headrest.