Journey settings
Journey settings
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
Examples of selections | Interpreting the display selected |
No stored message | a) Trip log. Successive display:
|
7.4 L/100 | b) Current fuel consumption. This value is displayed after a speed of approximately 19 mph (30 km/h) is reached. |
5.8 L/100 | Average fuel consumption since the last reset.
The value is displayed after having travelled at least 400 metres since the last reset. |
112,4 km | c) Trip mileage recorder: distance travelled since the last reset.
|
Reset tyre pressure, press and hold | d) Reset the tyre pressuresTYRE PRESSURE LOSS WARNING.
|
16 :30 | e) Set the time. |
Examples of selections | Interpreting the display selected | ||
On-board computer with mileage-before-service message | |||
Service in 18,641 miles (30,000 km)/12 months | d) Mileage before service and oil change. Service distance With the ignition on and the engine not running, access the "Mileage before service" information. When the distance or time value
approaches its limit, there are several possible scenarios:
The vehicle requires a service as soon as possible. | ||
Service due in less than 186 miles (300 km) or 24 days | |||
Service vehicle | |||
Resetting: to reset the mileage before the next service, press and hold the OK button for approximately 10 seconds until the display shows the mileage before service
permanently.
Note: if a service is performed without changing the engine oil, only the mileage before
the next service should be reset. In the event of an oil change, both the distance
before the next service and the next oil change should be reset.
| |||
Oil change in 18,641 miles (30,000 km)/24 months | Mileage before oil change With the ignition on and the engine not running, access the "Mileage before service" information to display the mileage before the
next oil change.
| ||
Depending on the vehicle, the mileage before an oil change varies according to the
driving style (frequent driving at low speed, door-to-door journeys, extensive use
at idling speed, towing a trailer, etc.). The distance remaining until the next oil
change can therefore decrease more quickly in some cases than the actual distance
travelled.
Reset: to reset the distance before the next service, press and hold button OK for approximately 10 seconds until the display shows the mileage before oil change
permanently.
Note: if a service is performed without changing the engine oil, only the mileage before
the next service should be reset. In the event of an oil change, both the distance
before the next service and the next oil change should be reset.
|